logo
Nachricht senden
produits
EINZELHEITEN ZU DEN PRODUKTEN
Haus > Produits >
High Payload Robot Fanuc M-410iC/315 4 Axis Automated Material Handling Palletizing Load Transfer Robot Arm

High Payload Robot Fanuc M-410iC/315 4 Axis Automated Material Handling Palletizing Load Transfer Robot Arm

MOQ: 1
Preis: US $32800.00 - 35500.00/ Set
Standardverpackung: Nach Bedarf
Lieferfrist: 90 Tage
Zahlungs-Methode: T/T
Lieferkapazität: 100 Sätze pro Jahr
Einzelheiten
Markenname
Fanuc
Modellnummer
M-410iC/315
Erreichen:
3143 mm
Leistung:
3 kW
Maximale Belastbarkeit am Handgelenk:
315 Kilogramm
Wiederholbarkeit:
± 0,05 mm
Schutz:
IP54
Steuerungsachsen:
4
Min Bestellmenge:
1
Preis:
US $32800.00 - 35500.00/ Set
Verpackung Informationen:
Nach Bedarf
Lieferzeit:
90 Tage
Zahlungsbedingungen:
T/T
Versorgungsmaterial-Fähigkeit:
100 Sätze pro Jahr
Beschreibung des Produkts
Fanuc M-410iC/315 Palletizing Robot
Why Chemical Plants Switched to This Robot

Moving full 200-liter drums or IBC totes by hand or crane is slow and dangerous. The M-410iC/315 with a drum clamp or fork tool does it smooth and fast. One robot handles the whole line – from filling station to pallet, stacking two high if needed. Paint, resin, and oil blending plants run them non-stop without dropping a drum.

Heavy Drum Goodies
  • 315 kg payload – full drum + clamp easy
  • 3143 mm reach – picks drums from conveyor
  • Stiff structure – no sway with offset loads
  • Works with drum clamps, fork tools, vacuum
  • Mechanical stops – extra safety
Drum Numbers
Typical load 250–300 kg with tool
Cycle time 20–25 seconds drum to pallet
Reach 3143 mm
Drum Jobs
  • 200 L drum palletizing
  • 1000 L IBC handling
  • Paint and resin lines
  • Lube oil drum transfer
Contact

Fanuc Robotics
Phone: +8615000725058
Email: edwardzhao@gbsxj.com

Other Palletizing Robots
  • M-410iC/185 – smaller version
  • M-410iC/500 – bigger brother
  • M-410iC/160 – faster but lighter
produits
EINZELHEITEN ZU DEN PRODUKTEN
High Payload Robot Fanuc M-410iC/315 4 Axis Automated Material Handling Palletizing Load Transfer Robot Arm
MOQ: 1
Preis: US $32800.00 - 35500.00/ Set
Standardverpackung: Nach Bedarf
Lieferfrist: 90 Tage
Zahlungs-Methode: T/T
Lieferkapazität: 100 Sätze pro Jahr
Einzelheiten
Markenname
Fanuc
Modellnummer
M-410iC/315
Erreichen:
3143 mm
Leistung:
3 kW
Maximale Belastbarkeit am Handgelenk:
315 Kilogramm
Wiederholbarkeit:
± 0,05 mm
Schutz:
IP54
Steuerungsachsen:
4
Min Bestellmenge:
1
Preis:
US $32800.00 - 35500.00/ Set
Verpackung Informationen:
Nach Bedarf
Lieferzeit:
90 Tage
Zahlungsbedingungen:
T/T
Versorgungsmaterial-Fähigkeit:
100 Sätze pro Jahr
Beschreibung des Produkts
Fanuc M-410iC/315 Palletizing Robot
Why Chemical Plants Switched to This Robot

Moving full 200-liter drums or IBC totes by hand or crane is slow and dangerous. The M-410iC/315 with a drum clamp or fork tool does it smooth and fast. One robot handles the whole line – from filling station to pallet, stacking two high if needed. Paint, resin, and oil blending plants run them non-stop without dropping a drum.

Heavy Drum Goodies
  • 315 kg payload – full drum + clamp easy
  • 3143 mm reach – picks drums from conveyor
  • Stiff structure – no sway with offset loads
  • Works with drum clamps, fork tools, vacuum
  • Mechanical stops – extra safety
Drum Numbers
Typical load 250–300 kg with tool
Cycle time 20–25 seconds drum to pallet
Reach 3143 mm
Drum Jobs
  • 200 L drum palletizing
  • 1000 L IBC handling
  • Paint and resin lines
  • Lube oil drum transfer
Contact

Fanuc Robotics
Phone: +8615000725058
Email: edwardzhao@gbsxj.com

Other Palletizing Robots
  • M-410iC/185 – smaller version
  • M-410iC/500 – bigger brother
  • M-410iC/160 – faster but lighter
Sitemap |  Datenschutz-Bestimmungen | Gute Qualität Chinas Industrieroboter-Arm Lieferant. Copyright-© 2023-2025 Xiangjing (Shanghai) M&E Technology Co., Ltd . Alle Rechte vorbehalten.